AntiSlip Kit
Non-slip system based on special resins and minerals
Anti-slip is a product with a high anti-slip power, specially designed to prevent falls in recently scrubbed areas or even in wet areas such as shower feet, in homes, hotels, hospitals, nursing homes, leisure areas, etc. Anti-slip creates micropores on the treated surface that act as sunction cups, achieving a friction coefficient >0,75.
MARBLE
GRANITE
HARD SURF.
MATERIALS
APPLICATION
MANUAL
TECHNICAL DATA TABLE
Check all the details and technical specifications of the product
Anti-slip system, made from a special resin for stone and high-performance minerals. Once mixed, they form a suitable compound to apply in areas where anti-slip properties are required (stairs, ramps, etc.). Two rolls of adhesive tape are included, necessary for masking the areas close to where we will apply the compound. This way, it is possible to create straight or predefined-shaped anti-slip strips. As an example of performance, we can inform that to create an anti-slip strip of 1m in length, 40mm in width, and 5mm in depth, we will need 500g of anti-slip compound. The kit contains a total of 2.5kg of product, allowing us to make a total of 5 meters of anti-slip strips with the previously indicated width and depth.
INTERIOR AND EXTERIOR SPECIAL PAVEMENTS
With 500 g, it can be treated:
-Length 1m
-Width 40mm
-Depth 5mm
*The performance is indicative, see instructions for use.
1º Mask the area to be treated using the supplied adhesive tape, leaving the area designated for treatment exposed and clearly defined. 2º Mix the supplied resin (Component A) with the liquid hardener at 2-3% in the resin container. Homogenize the entire compound using a manual or mechanical stirrer. 3º Pour the abrasive mineral (Component B) into the resin container as well. Homogenize the entire compound using a manual or mechanical stirrer. 4º Apply the resulting compound onto the stone using an appropriate applicator (spatula, trowel, etc.). 5º Remove the adhesive tape before the compound hardens.
It is recommended to use milling or a similar mechanical treatment before applying the anti-slip treatment to the area to be treated. The surfaces to be treated must be clean and dry.
| Packaging: Kit A (1Kg) + B (1,5Kg) |
CHARACTERISTICS
Easy application
Special for stairs, ramps, etc.
Adhesive tapes are attached
Based on Sinner's Theory, we understand that the ideal factors for achieving good cleaning and treatment are rarely present.
Therefore, our technical team researches and develops products with effective formulations that optimize resources while reducing application times.
