AntiSlip Kit

Anti-slip system, made from a special resin for stone and high-performance minerals. Once mixed, they form a suitable compound to apply in areas where anti-slip properties are required (stairs, ramps, etc.). Two rolls of adhesive tape are included, necessary for masking the areas close to where we will apply the compound. This way, it is possible to create straight or predefined-shaped anti-slip strips. As an example of performance, we can inform that to create an anti-slip strip of 1m in length, 40mm in width, and 5mm in depth, we will need 500g of anti-slip compound. The kit contains a total of 2.5kg of product, allowing us to make a total of 5 meters of anti-slip strips with the previously indicated width and depth.

 With 500 g, it can be treated:

-Length 1m

-Width 40mm

-Depth 5mm

*The performance is indicative, see instructions for use. 

1º Enmascarar la zona a tratar, mediante la cinta adhesiva suministrada, quedando al descubierto y perfectamente delimitada, la zona destinada al tratamiento.

2º Mezclar la resina suministrada (Componente A) con el secante líquido al 2-3%, en el recipiente de la resina. Homogeneizar todo el compuesto con ayuda de un agitador manual o mecánico. 

3º Verter el mineral abrasivo (Componente B), también en el recipiente de la resina. Homogeneizar todo el compuesto con ayuda de un agitador manual o mecánico.

4º Aplicar sobre la Piedra el compuesto resultante, ayudándose mediante aplicador adecuado (espátula, llana, etc). 

5º Retirar la cinta adhesiva antes de que endurezca el compuesto.

It is recommended to use milling or a similar mechanical treatment before applying the anti-slip treatment to the area to be treated. The surfaces to be treated must be clean and dry.