AntiSlip Kit

Anti-slip system, made from a special resin for stone and high-performance minerals. Once mixed, they form a suitable compound to apply in areas where anti-slip properties are required (stairs, ramps, etc.). Two rolls of adhesive tape are included, necessary for masking the areas close to where we will apply the compound. This way, it is possible to create straight or predefined-shaped anti-slip strips. As an example of performance, we can inform that to create an anti-slip strip of 1m in length, 40mm in width, and 5mm in depth, we will need 500g of anti-slip compound. The kit contains a total of 2.5kg of product, allowing us to make a total of 5 meters of anti-slip strips with the previously indicated width and depth.

 With 500 g, it can be treated:

-Length 1m

-Width 40mm

-Depth 5mm

*The performance is indicative, see instructions for use. 

1st Mask the area to be treated, using the supplied adhesive tape, leaving exposed and perfectly delineated, the area intended for treatment.

2nd Mix the supplied resin (Component A) with the liquid hardener at 2-3%, in the resin container. Homogenize the entire compound with the help of a manual or mechanical stirrer. 

3rd Pour the abrasive mineral (Component B), also into the resin container. Homogenize the entire compound with the help of a manual or mechanical stirrer.

4th Apply the resulting compound onto the Stone, using an appropriate applicator (spatula, trowel, etc). 

5th Remove the adhesive tape before the compound hardens.

It is recommended to use milling or a similar mechanical treatment before applying the anti-slip treatment to the area to be treated. The surfaces to be treated must be clean and dry.