Stain Off

       INTERIOR AND EXTERIOR                      SPECIAL                                                                                COVERINGS                                                                          AND PAVEMENTS         

 1 LITER CAN TREAT:

Manual application (2-4%)

Application with high-pressure machine (10-15%)

Application with scrubbing machine (2-4%)

Application with swing machine (10-15%)

*The performance is indicative, see instructions for use. 

MANUAL APPLICATION ( 2-4% ) :

Dilute 200 to 400ml of STAIN OFF in 10 liters of water depending on the level of dirt. Apply with a mop or cloth on the surface to be cleaned. Let it sit for a few minutes and rinse.

APPLICATION WITH HIGH PRESSURIZED MACHINE (10-15%):

 Introduce pure STAIN OFF into the high-pressure machine. Adjust the machine's potentiometer from 1% to 3% depending on the level of dirt to be removed. Apply the product solution to the surface to be cleaned according to the machine's instructions. Finally, rinse with water.

APPLICATION WITH SCRUBBER MACHINE (2-4%):

 Dilute 100 to 200ml of STAIN OFF in 10 liters of water according to the level of dirt, inside the clean water tank of the scrubber machine. Start scrubbing according to the instructions of the scrubber machine.

APPLICATION WITH SWING MACHINE (10-15%):

 Dilute 500 to 1000ml of STAIN OFF in 10 liters of water depending on the level of dirt, and distribute it with a mop or cloth over the surface to be cleaned. Use a low-speed rotary machine (140-250 r.p.m) with a brown or black FLOOR PAD. Rinse and collect the dirt, preferably with a wet vacuum.